Eaton MPI5451R3-2R2-R 2.2 uH Shielded Power Inductor
Eaton MPI5451R3-2R2-R 2.2 uH Shielded Power Inductor

Eaton MPI5451R3-2R2-R 2.2 uH Shielded Power Inductor

Share
MPI5451R3-2R2-R: automotive power inductor, 2.2 uH , 4.1 A Irms, Isat 5 A, DCR 24 mOhm.
    • Product Details
    • Download

    Eaton MPI5451R3-2R2-R 2.2 uH Shielded Power Inductor

    MPI5451R3-2R2-R at a glance: automotive power inductor, 2.2 uH , 4.1 A Irms, Isat 5 A, DCR 24 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberMPI5451R3-2R2-R
    Inductance2.2 uH
    DCR typical @ +20 °C24 mOhm
    Irms (DC, 40 °C rise)4.1 A
    Isat5 A
    K-factor452
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10247

    Dimensions and Pad Layout

    MPI5451R3-2R2-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10247: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    The part is built for automotive DC-DC stages: AEC-Q200 qualified, shielded, and characterised with both typical and maximum DCR so the loss budget can be built on either figure.

    At 4.1 A the winding dissipates about 0.403 W in copper using the typical DCR of 24 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 27.5 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 452 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the MPI5451R3 family this is value 5 of 9, in a range from 0.47 uH to 10 uH.

    Where This Series Fits

    The MPIA family is the automotive miniature power range: AEC-Q200 qualified, low profile, in sizes from 2 mm to 4 mm, with both typical and maximum DCR quoted for every row.

    • DCR is quoted at +20 °C; copper rises about 0.4 % per °C, so the hot loss is higher than the cold figure.
    • Typical applications: handheld/mobile devices; portable media players; mp3 players; battery operated devices; notebook/netbook.
    • Design note: ripple from OCL, thermal from Irms, transient from Isat. Three numbers, three checks.

    Frequently Asked Questions

    Is the part shielded?
    The molded body encloses the winding, so the external field is small enough for dense layouts.

    What is the difference between Irms and Isat?
    Irms is the DC current for the rated temperature rise; Isat is the peak current at a defined inductance rolloff. A converter can exceed Irms briefly but must stay inside Isat.

    Why two DCR columns?
    Typical and maximum. A guaranteed thermal design uses the maximum; a nominal efficiency calculation can use the typical.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products