
| Parameter | Value |
|---|---|
| Orderable part number | MPIA2510V2-R68-R |
| Inductance | 0.68 uH |
| DCR typical @ +20 °C | 44 mOhm |
| DCR maximum @ +20 °C | 80 mOhm |
| Irms (DC, 40 °C rise) | 3.1 A |
| Isat | 37 A |
| SRF typical | 5733 MHz |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10650 |

Drawing reproduced from Eaton Technical Data 10650: outline with
rated mm dimensions, pad layout and marking.
The part is built for automotive DC-DC stages: AEC-Q200 qualified, shielded, and characterised with both typical and maximum DCR so the loss budget can be built on either figure.
At 3.1 A the winding dissipates about 0.423 W in copper using the typical DCR of 44 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 465 uJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 5733 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
Within the MPIA2510V2 family this is value 3 of 7, in a range from 0.33 uH to 3.3 uH.
The MPIA family is the automotive miniature power range: AEC-Q200 qualified, low profile, in sizes from 2 mm to 4 mm, with both typical and maximum DCR quoted for every row.
Is the part shielded?
The molded body encloses the winding, so the external field is small enough for dense layouts.
Is the part shielded?
The molded body encloses the winding, so the external field is small enough for dense layouts.
Is the part shielded?
The molded body encloses the winding, so the external field is small enough for dense layouts.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd