
| Parameter | Value |
|---|---|
| Orderable part number | MPIA4015V2-100-R |
| Inductance | 10 uH |
| DCR typical @ +20 °C | 294 mOhm |
| Irms (DC, 40 °C rise) | 1.8 A |
| Isat | 245 A |
| SRF typical | 14 MHz |
| K-factor | 766 |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10652 |

Drawing reproduced from Eaton Technical Data 10652: outline with
rated mm dimensions, pad layout and marking.
The part is built for automotive DC-DC stages: AEC-Q200 qualified, shielded, and characterised with both typical and maximum DCR so the loss budget can be built on either figure.
At 1.8 A the winding dissipates about 0.953 W in copper using the typical DCR of 294 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 300125 uJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 14 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
The K-factor of 766 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.
Within the MPIA4015V2 family this is value 12 of 12, in a range from 0.22 uH to 10 uH.
The MPIA family is the automotive miniature power range: AEC-Q200 qualified, low profile, in sizes from 2 mm to 4 mm, with both typical and maximum DCR quoted for every row.
Is the part shielded?
The molded body encloses the winding, so the external field is small enough for dense layouts.
Is the part shielded?
The molded body encloses the winding, so the external field is small enough for dense layouts.
Why two DCR columns?
Typical and maximum. A guaranteed thermal design uses the maximum; a nominal efficiency calculation can use the typical.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd