Eaton MPIA4015V2-3R3-R 3.3 uH Power Inductor, 3 A
Eaton MPIA4015V2-3R3-R 3.3 uH Power Inductor, 3 A

Eaton MPIA4015V2-3R3-R 3.3 uH Power Inductor, 3 A

Share
MPIA4015V2-3R3-R: automotive power inductor, 3.3 uH , 3 A Irms, Isat 77 A, DCR 92 mOhm.
    • Product Details
    • Download

    Eaton MPIA4015V2-3R3-R 3.3 uH Power Inductor, 3 A

    MPIA4015V2-3R3-R at a glance: automotive power inductor, 3.3 uH , 3 A Irms, Isat 77 A, DCR 92 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberMPIA4015V2-3R3-R
    Inductance3.3 uH
    DCR typical @ +20 °C92 mOhm
    Irms (DC, 40 °C rise)3 A
    Isat77 A
    SRF typical31 MHz
    K-factor854
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10652

    Outline Drawing

    MPIA4015V2-3R3-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10652: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Power inductors in this family are chosen on three numbers: inductance for ripple, saturation current for the transient, and DCR for loss. The data sheet row gives all three against defined test conditions.

    At 3 A the winding dissipates about 0.828 W in copper using the typical DCR of 92 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 9783 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 31 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    The K-factor of 854 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the MPIA4015V2 family this is value 9 of 12, in a range from 0.22 uH to 10 uH.

    What This Family Is For

    The MPIA family is the automotive miniature power range: AEC-Q200 qualified, low profile, in sizes from 2 mm to 4 mm, with both typical and maximum DCR quoted for every row.

    • DCR is quoted at +20 °C; copper rises about 0.4 % per °C, so the hot loss is higher than the cold figure.
    • Typical applications: body electronics; central body control module; vehicle access control system; headlamps, tail lamps and interior lighting; doors, window lift and seat control.
    • Design note: ripple from OCL, thermal from Irms, transient from Isat. Three numbers, three checks.

    Frequently Asked Questions

    Is the part shielded?
    The molded body encloses the winding, so the external field is small enough for dense layouts.

    Is the part shielded?
    The molded body encloses the winding, so the external field is small enough for dense layouts.

    How much inductance is left at rated current?
    The FLL column gives the inductance at saturation current. Ripple at full load should be calculated with FLL.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products