
| Parameter | Value |
|---|---|
| Orderable part number | MPIA4020V3-R |
| Inductance | 4.4 uH |
| FLL minimum (at Isat) | 4.2 uH |
| DCR typical @ +20 °C | 0.8 mOhm |
| DCR maximum @ +20 °C | 2.8 mOhm |
| Irms (DC, 40 °C rise) | 1.8 A |
| Isat | 2 A |
| SRF typical | 0 MHz |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1486 |

Drawing reproduced from Eaton Technical Data ELX1486: outline with
rated mm dimensions, pad layout and marking.
A molded automotive power inductor with a soft saturation curve: as current rises the inductance droops instead of collapsing, so a converter keeps control through a load step. The body is molded around the winding, which contains the field.
At 1.8 A the winding dissipates about 0.003 W in copper using the typical DCR of 0.8 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 8.8 uJ at the saturation point, which is the energy available to bridge a load step.
Within the MPIA4020V3 family this is value 12 of 17, in a range from 0.1 uH to 22 uH.
The MPIA family is the automotive miniature power range: AEC-Q200 qualified, low profile, in sizes from 2 mm to 4 mm, with both typical and maximum DCR quoted for every row.
Why two DCR columns?
Typical and maximum. A guaranteed thermal design uses the maximum; a nominal efficiency calculation can use the typical.
How much inductance is left at rated current?
The FLL column gives the inductance at saturation current. Ripple at full load should be calculated with FLL.
What is the difference between Irms and Isat?
Irms is the DC current for the rated temperature rise; Isat is the peak current at a defined inductance rolloff. A converter can exceed Irms briefly but must stay inside Isat.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd