
| Parameter | Value |
|---|---|
| Orderable part number | MPIA4020V3-R33-R |
| Inductance | 0.33 uH |
| FLL minimum (at Isat) | 0.185 uH |
| DCR typical @ +20 °C | 7.5 mOhm |
| DCR maximum @ +20 °C | 9 mOhm |
| Irms (DC, 40 °C rise) | 9.5 A |
| Isat | 12 A |
| SRF typical | 135 MHz |
| K-factor | 2025 |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1486 |

Drawing reproduced from Eaton Technical Data ELX1486: outline with
rated mm dimensions, pad layout and marking.
Power inductors in this family are chosen on three numbers: inductance for ripple, saturation current for the transient, and DCR for loss. The data sheet row gives all three against defined test conditions.
At 9.5 A the winding dissipates about 0.677 W in copper using the typical DCR of 7.5 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 23.8 uJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 135 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
The K-factor of 2025 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.
Within the MPIA4020V3 family this is value 3 of 16, in a range from 0.1 uH to 22 uH.
The MPIA family is the automotive miniature power range: AEC-Q200 qualified, low profile, in sizes from 2 mm to 4 mm, with both typical and maximum DCR quoted for every row.
Is the part shielded?
The molded body encloses the winding, so the external field is small enough for dense layouts.
Why two DCR columns?
Typical and maximum. A guaranteed thermal design uses the maximum; a nominal efficiency calculation can use the typical.
Why two DCR columns?
Typical and maximum. A guaranteed thermal design uses the maximum; a nominal efficiency calculation can use the typical.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd