Eaton MPIA4040R1-4R7-R 4.7 uH AEC-Q200 Inductor 180 mOhm
Eaton MPIA4040R1-4R7-R 4.7 uH AEC-Q200 Inductor 180 mOhm

Eaton MPIA4040R1-4R7-R 4.7 uH AEC-Q200 Inductor 180 mOhm

Share
MPIA4040R1-4R7-R: automotive power inductor, 4.7 uH , 1.8 A Irms, Isat 3.8 A, DCR 180 mOhm.
    • Product Details
    • Download

    Eaton MPIA4040R1-4R7-R 4.7 uH AEC-Q200 Inductor 180 mOhm

    MPIA4040R1-4R7-R at a glance: automotive power inductor, 4.7 uH , 1.8 A Irms, Isat 3.8 A, DCR 180 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMPIA4040R1-4R7-R
    Inductance4.7 uH
    DCR typical @ +20 °C180 mOhm
    Irms (DC, 40 °C rise)1.8 A
    Isat3.8 A
    K-factor411
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10230

    Mechanical Drawing

    MPIA4040R1-4R7-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10230: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Power inductors in this family are chosen on three numbers: inductance for ripple, saturation current for the transient, and DCR for loss. The data sheet row gives all three against defined test conditions.

    At 1.8 A the winding dissipates about 0.583 W in copper using the typical DCR of 180 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 33.9 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 411 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the MPIA4040R1 family this is value 11 of 11, in a range from 0.09 uH to 4.7 uH.

    Positioning in the Range

    The MPIA family is the automotive miniature power range: AEC-Q200 qualified, low profile, in sizes from 2 mm to 4 mm, with both typical and maximum DCR quoted for every row.

    • DCR is quoted at +20 °C; copper rises about 0.4 % per °C, so the hot loss is higher than the cold figure.
    • Typical applications: body electronics – central body control module – vehicle access control system – headlamps, tail lamps and interior lighting – door control; chassis and safety electronics – airbag control unit.
    • Design note: ripple from OCL, thermal from Irms, transient from Isat. Three numbers, three checks.

    Frequently Asked Questions

    How much inductance is left at rated current?
    The FLL column gives the inductance at saturation current. Ripple at full load should be calculated with FLL.

    How much inductance is left at rated current?
    The FLL column gives the inductance at saturation current. Ripple at full load should be calculated with FLL.

    Is the part shielded?
    The molded body encloses the winding, so the external field is small enough for dense layouts.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products