
| Parameter | Value |
|---|---|
| Orderable part number | MPIA4040R2-1R5-R |
| Inductance | 1.5 uH |
| DCR typical @ +20 °C | 37 mOhm |
| Irms (DC, 40 °C rise) | 3.8 A |
| Isat | 7.6 A |
| K-factor | 701 |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10230 |

Drawing reproduced from Eaton Technical Data 10230: outline with
rated mm dimensions, pad layout and marking.
This is a surface-mount power inductor with a distributed-gap core. The energy is stored through the volume of the magnetic material rather than a single gap, which produces the gradual rolloff and keeps the fringing field small.
At 3.8 A the winding dissipates about 0.534 W in copper using the typical DCR of 37 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 43.3 uJ at the saturation point, which is the energy available to bridge a load step.
The K-factor of 701 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.
Within the MPIA4040R2 family this is value 3 of 7, in a range from 0.47 uH to 6.8 uH.
The MPIA family is the automotive miniature power range: AEC-Q200 qualified, low profile, in sizes from 2 mm to 4 mm, with both typical and maximum DCR quoted for every row.
Why two DCR columns?
Typical and maximum. A guaranteed thermal design uses the maximum; a nominal efficiency calculation can use the typical.
How much inductance is left at rated current?
The FLL column gives the inductance at saturation current. Ripple at full load should be calculated with FLL.
How much inductance is left at rated current?
The FLL column gives the inductance at saturation current. Ripple at full load should be calculated with FLL.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd