Eaton MPIA4040R2-4R7-R 4.7 uH AEC-Q200 Inductor 105 mOhm
Eaton MPIA4040R2-4R7-R 4.7 uH AEC-Q200 Inductor 105 mOhm

Eaton MPIA4040R2-4R7-R 4.7 uH AEC-Q200 Inductor 105 mOhm

Share
MPIA4040R2-4R7-R: automotive power inductor, 4.7 uH , 2.2 A Irms, Isat 4.3 A, DCR 105 mOhm.
    • Product Details
    • Download

    Eaton MPIA4040R2-4R7-R 4.7 uH AEC-Q200 Inductor 105 mOhm

    MPIA4040R2-4R7-R at a glance: automotive power inductor, 4.7 uH , 2.2 A Irms, Isat 4.3 A, DCR 105 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberMPIA4040R2-4R7-R
    Inductance4.7 uH
    DCR typical @ +20 °C105 mOhm
    Irms (DC, 40 °C rise)2.2 A
    Isat4.3 A
    K-factor421
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10230

    Mechanical Dimensions & Pad Layout

    MPIA4040R2-4R7-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10230: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    A molded automotive power inductor with a soft saturation curve: as current rises the inductance droops instead of collapsing, so a converter keeps control through a load step. The body is molded around the winding, which contains the field.

    At 2.2 A the winding dissipates about 0.508 W in copper using the typical DCR of 105 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 43.5 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 421 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the MPIA4040R2 family this is value 6 of 7, in a range from 0.47 uH to 6.8 uH.

    Series Positioning

    The MPIA family is the automotive miniature power range: AEC-Q200 qualified, low profile, in sizes from 2 mm to 4 mm, with both typical and maximum DCR quoted for every row.

    • DCR is quoted at +20 °C; copper rises about 0.4 % per °C, so the hot loss is higher than the cold figure.
    • Typical applications: body electronics – central body control module – vehicle access control system – headlamps, tail lamps and interior lighting – door control; chassis and safety electronics – airbag control unit.
    • Design note: ripple from OCL, thermal from Irms, transient from Isat. Three numbers, three checks.

    Frequently Asked Questions

    What is the difference between Irms and Isat?
    Irms is the DC current for the rated temperature rise; Isat is the peak current at a defined inductance rolloff. A converter can exceed Irms briefly but must stay inside Isat.

    Why two DCR columns?
    Typical and maximum. A guaranteed thermal design uses the maximum; a nominal efficiency calculation can use the typical.

    What is the difference between Irms and Isat?
    Irms is the DC current for the rated temperature rise; Isat is the peak current at a defined inductance rolloff. A converter can exceed Irms briefly but must stay inside Isat.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products