Eaton MPIA4040R3-100-R 10 uH Power Inductor, 1.5 A
Eaton MPIA4040R3-100-R 10 uH Power Inductor, 1.5 A

Eaton MPIA4040R3-100-R 10 uH Power Inductor, 1.5 A

Share
MPIA4040R3-100-R: automotive power inductor, 10 uH , 1.5 A Irms, Isat 3.8 A, DCR 213 mOhm.
    • Product Details
    • Download

    Eaton MPIA4040R3-100-R 10 uH Power Inductor, 1.5 A

    MPIA4040R3-100-R at a glance: automotive power inductor, 10 uH , 1.5 A Irms, Isat 3.8 A, DCR 213 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMPIA4040R3-100-R
    Inductance10 uH
    DCR typical @ +20 °C213 mOhm
    Irms (DC, 40 °C rise)1.5 A
    Isat3.8 A
    K-factor251
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10230

    Outline Drawing

    MPIA4040R3-100-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10230: outline with
    rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    The part is built for automotive DC-DC stages: AEC-Q200 qualified, shielded, and characterised with both typical and maximum DCR so the loss budget can be built on either figure.

    At 1.5 A the winding dissipates about 0.479 W in copper using the typical DCR of 213 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 72.2 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 251 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the MPIA4040R3 family this is value 9 of 10, in a range from 0.22 uH to 15 uH.

    What This Family Is For

    The MPIA family is the automotive miniature power range: AEC-Q200 qualified, low profile, in sizes from 2 mm to 4 mm, with both typical and maximum DCR quoted for every row.

    • DCR is quoted at +20 °C; copper rises about 0.4 % per °C, so the hot loss is higher than the cold figure.
    • Typical applications: body electronics – central body control module – vehicle access control system – headlamps, tail lamps and interior lighting – door control; chassis and safety electronics – airbag control unit.
    • Design note: ripple from OCL, thermal from Irms, transient from Isat. Three numbers, three checks.

    Frequently Asked Questions

    How much inductance is left at rated current?
    The FLL column gives the inductance at saturation current. Ripple at full load should be calculated with FLL.

    Is the part shielded?
    The molded body encloses the winding, so the external field is small enough for dense layouts.

    How much inductance is left at rated current?
    The FLL column gives the inductance at saturation current. Ripple at full load should be calculated with FLL.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products