
| Parameter | Value |
|---|---|
| Orderable part number | MPIA4040R4-R33-R |
| Inductance | 0.33 uH |
| DCR typical @ +20 °C | 12.8 mOhm |
| Irms (DC, 40 °C rise) | 2016 A |
| Isat | 9.5 A |
| K-factor | 6 |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10230 |

Drawing reproduced from Eaton Technical Data 10230: outline with
rated mm dimensions, pad layout and marking.
A molded automotive power inductor with a soft saturation curve: as current rises the inductance droops instead of collapsing, so a converter keeps control through a load step. The body is molded around the winding, which contains the field.
At 2016 A the winding dissipates about 52022 W in copper using the typical DCR of 12.8 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 14.9 uJ at the saturation point, which is the energy available to bridge a load step.
The K-factor of 6 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.
Within the MPIA4040R4 family this is value 2 of 6, in a range from 0.22 uH to 2.2 uH.
The MPIA family is the automotive miniature power range: AEC-Q200 qualified, low profile, in sizes from 2 mm to 4 mm, with both typical and maximum DCR quoted for every row.
Why two DCR columns?
Typical and maximum. A guaranteed thermal design uses the maximum; a nominal efficiency calculation can use the typical.
Why two DCR columns?
Typical and maximum. A guaranteed thermal design uses the maximum; a nominal efficiency calculation can use the typical.
Is the part shielded?
The molded body encloses the winding, so the external field is small enough for dense layouts.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd