Eaton PCA1V3223-220-R 22 uH PoC Inductor, Isat 400 mA
Eaton PCA1V3223-220-R 22 uH PoC Inductor, Isat 400 mA

Eaton PCA1V3223-220-R 22 uH PoC Inductor, Isat 400 mA

Share
PCA1V3223-220-R: power-over-coax inductor, 22 uH ±20%, Isat 400 mA, Irms – mA, DCR 620 mOhm.
    • Product Details
    • Download

    Eaton PCA1V3223-220-R 22 uH PoC Inductor, Isat 400 mA

    PCA1V3223-220-R at a glance: power-over-coax inductor, 22 uH ±20%, Isat 400 mA, Irms – mA, DCR 620 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberPCA1V3223-220-R
    Inductance22 uH ±20%
    DCR typical @ +20 °C620 mOhm
    Isat400 mA
    Isat2550 mA
    Isat3500 mA
    Isat4280 mA
    SRF typical50 MHz
    MountingSurface mount
    Operating temperature-55 °C to +150 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1350

    Outline Drawing

    PCA1V3223-220-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1350: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    In a camera or radar link the coax carries both the signal and the DC feed. The inductor is the component that separates them: it looks like a short to DC and a high impedance to the RF, so the bias network does not load the line.

    The core stores about 1760 nJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 50 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the PCA1V3223 family this is value 6 of 7, in a range from 2.2 uH to 47 uH.

    Series Positioning

    The PCA family is the power-over-coax range: small chip inductors for bias-tee circuits in automotive camera and radar links, characterised at multiple temperatures.

    • The bias current and the RF power share the same winding. Check the saturation margin against the sum, not just the DC component.
    • Typical applications: adas camera; srr (short range radar); lidar (light detection and ranging); vehicle communications; autonomous driving (3d mapping.
    • Design note: the impedance at the link frequency matters more than the inductance value on the label.

    Frequently Asked Questions

    What matters for the RF side?
    The impedance at the link frequency, which depends on the inductance and its self-resonance. Keep the operating band below SRF.

    Why are Isat and Irms given at several temperatures?
    The part sits in a module that heats up, and both the magnetic and the thermal limits move with temperature. The table lets the bias network be closed at the hot corner.

    What matters for the RF side?
    The impedance at the link frequency, which depends on the inductance and its self-resonance. Keep the operating band below SRF.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products