
| Parameter | Value |
|---|---|
| Orderable part number | PCA1V3223-4R7-R |
| Inductance | 4.7 uH ±20% |
| DCR typical @ +20 °C | 280 mOhm |
| Isat | 850 mA |
| Isat2 | 850 mA |
| Isat3 | 720 mA |
| Isat4 | 400 mA |
| SRF typical | 100 MHz |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +150 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1350 |

Drawing reproduced from Eaton Technical Data ELX1350: outline with
rated mm dimensions, pad layout and marking.
In a camera or radar link the coax carries both the signal and the DC feed. The inductor is the component that separates them: it looks like a short to DC and a high impedance to the RF, so the bias network does not load the line.
The core stores about 1698 nJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 100 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
Within the PCA1V3223 family this is value 4 of 7, in a range from 2.2 uH to 47 uH.
The PCA family is the power-over-coax range: small chip inductors for bias-tee circuits in automotive camera and radar links, characterised at multiple temperatures.
What matters for the RF side?
The impedance at the link frequency, which depends on the inductance and its self-resonance. Keep the operating band below SRF.
What matters for the RF side?
The impedance at the link frequency, which depends on the inductance and its self-resonance. Keep the operating band below SRF.
Why are Isat and Irms given at several temperatures?
The part sits in a module that heats up, and both the magnetic and the thermal limits move with temperature. The table lets the bias network be closed at the hot corner.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd