Eaton PCA1V3223-XXX-R 3.2 uH PoC Inductor, Isat 0.2 mA
Eaton PCA1V3223-XXX-R 3.2 uH PoC Inductor, Isat 0.2 mA

Eaton PCA1V3223-XXX-R 3.2 uH PoC Inductor, Isat 0.2 mA

Share
PCA1V3223-XXX-R: power-over-coax inductor, 3.2 uH ±0.20%, Isat 0.2 mA, Irms – mA, DCR 2500 mOhm.
    • Product Details
    • Download

    Eaton PCA1V3223-XXX-R 3.2 uH PoC Inductor, Isat 0.2 mA

    PCA1V3223-XXX-R at a glance: power-over-coax inductor, 3.2 uH ±0.20%, Isat 0.2 mA, Irms – mA, DCR 2500 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberPCA1V3223-XXX-R
    Inductance3.2 uH ±0.20%
    DCR typical @ +20 °C2500 mOhm
    Isat0.2 mA
    Isat22.3 mA
    Isat40.2 mA
    MountingSurface mount
    Operating temperature-55 °C to +150 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1350

    Dimensions and Pad Layout

    PCA1V3223-XXX-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1350: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    A power-over-coax inductor sits in the bias-tee of a coaxial link: DC power and the RF signal share one cable, and this part keeps the RF out of the DC supply while passing the bias current. The value is small, the current is modest, and the impedance at the link frequency is what does the work.

    The core stores about 0 nJ at the saturation point, which is the energy available to bridge a load step.

    Within the PCA1V3223 family this is value 3 of 8, in a range from 2.2 uH to 47 uH.

    What This Family Is For

    The PCA family is the power-over-coax range: small chip inductors for bias-tee circuits in automotive camera and radar links, characterised at multiple temperatures.

    • The bias current and the RF power share the same winding. Check the saturation margin against the sum, not just the DC component.
    • Typical applications: adas camera; srr (short range radar); lidar (light detection and ranging); vehicle communications; autonomous driving (3d mapping.
    • Design note: the impedance at the link frequency matters more than the inductance value on the label.

    Frequently Asked Questions

    What does a PoC inductor do in a camera link?
    It separates DC bias from the RF signal on a shared coax: it passes the DC with low loss and presents a high impedance to the RF band.

    Is the part AEC-Q200 qualified?
    Yes, the PCA family is qualified for automotive use, which is what a camera or radar module requires.

    Why are Isat and Irms given at several temperatures?
    The part sits in a module that heats up, and both the magnetic and the thermal limits move with temperature. The table lets the bias network be closed at the hot corner.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products