Eaton PCA1V3230-220-R 22 uH Power-over-Coax Inductor
Eaton PCA1V3230-220-R 22 uH Power-over-Coax Inductor

Eaton PCA1V3230-220-R 22 uH Power-over-Coax Inductor

Share
PCA1V3230-220-R: power-over-coax inductor, 22 uH ±20%, Isat 720 mA, Irms 700 mA, DCR 760 mOhm.
    • Product Details
    • Download

    Eaton PCA1V3230-220-R 22 uH Power-over-Coax Inductor

    PCA1V3230-220-R at a glance: power-over-coax inductor, 22 uH ±20%, Isat 720 mA, Irms 700 mA, DCR 760 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberPCA1V3230-220-R
    Inductance22 uH ±20%
    DCR typical @ +20 °C760 mOhm
    DCR maximum @ +20 °C880 mOhm
    Irms (DC, 40 °C rise)700 mA
    Irms2630 mA
    Irms3400 mA
    Isat720 mA
    Isat2580 mA
    Isat3520 mA
    Isat4450 mA
    Isat5390 mA
    SRF typical70 MHz
    MountingSurface mount
    Operating temperature-55 °C to +140 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1355

    Mechanical Dimensions & Pad Layout

    PCA1V3230-220-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1355: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a chip inductor built for power-over-coax circuits: small value, low DCR, and characterised for saturation and rated current at several temperatures because the part sits in a module that heats up.

    At 700 A the winding dissipates about 372400 W in copper using the typical DCR of 760 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 5702 nJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 70 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the PCA1V3230 family this is value 4 of 4, in a range from 2.2 uH to 22 uH.

    Where This Series Fits

    The PCA family is the power-over-coax range: small chip inductors for bias-tee circuits in automotive camera and radar links, characterised at multiple temperatures.

    • The bias current and the RF power share the same winding. Check the saturation margin against the sum, not just the DC component.
    • Typical applications: adas camera; srr (short range radar); lidar (light detection and ranging); vehicle communications; autonomous driving (3d mapping).
    • Design note: the impedance at the link frequency matters more than the inductance value on the label.

    Frequently Asked Questions

    Why are Isat and Irms given at several temperatures?
    The part sits in a module that heats up, and both the magnetic and the thermal limits move with temperature. The table lets the bias network be closed at the hot corner.

    What does a PoC inductor do in a camera link?
    It separates DC bias from the RF signal on a shared coax: it passes the DC with low loss and presents a high impedance to the RF band.

    What does a PoC inductor do in a camera link?
    It separates DC bias from the RF signal on a shared coax: it passes the DC with low loss and presents a high impedance to the RF band.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products