Eaton PCA1V3230-6R8-R 6.8 uH PoC Inductor, Isat 1400 mA
Eaton PCA1V3230-6R8-R 6.8 uH PoC Inductor, Isat 1400 mA

Eaton PCA1V3230-6R8-R 6.8 uH PoC Inductor, Isat 1400 mA

Share
PCA1V3230-6R8-R: power-over-coax inductor, 6.8 uH ±20%, Isat 1400 mA, Irms 1360 mA, DCR 200 mOhm.
    • Product Details
    • Download

    Eaton PCA1V3230-6R8-R 6.8 uH PoC Inductor, Isat 1400 mA

    PCA1V3230-6R8-R at a glance: power-over-coax inductor, 6.8 uH ±20%, Isat 1400 mA, Irms 1360 mA, DCR 200 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberPCA1V3230-6R8-R
    Inductance6.8 uH ±20%
    DCR typical @ +20 °C200 mOhm
    DCR maximum @ +20 °C240 mOhm
    Irms (DC, 40 °C rise)1360 mA
    Irms21230 mA
    Irms3800 mA
    Isat1400 mA
    Isat21000 mA
    Isat3930 mA
    Isat4800 mA
    Isat5700 mA
    SRF typical120 MHz
    MountingSurface mount
    Operating temperature-55 °C to +140 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1355

    Outline Drawing

    PCA1V3230-6R8-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1355: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a chip inductor built for power-over-coax circuits: small value, low DCR, and characterised for saturation and rated current at several temperatures because the part sits in a module that heats up.

    At 1360 A the winding dissipates about 369920 W in copper using the typical DCR of 200 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 6664 nJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 120 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the PCA1V3230 family this is value 2 of 4, in a range from 2.2 uH to 22 uH.

    Series Positioning

    The PCA family is the power-over-coax range: small chip inductors for bias-tee circuits in automotive camera and radar links, characterised at multiple temperatures.

    • The bias current and the RF power share the same winding. Check the saturation margin against the sum, not just the DC component.
    • Typical applications: adas camera; srr (short range radar); lidar (light detection and ranging); vehicle communications; autonomous driving (3d mapping).
    • Design note: the impedance at the link frequency matters more than the inductance value on the label.

    Frequently Asked Questions

    What does a PoC inductor do in a camera link?
    It separates DC bias from the RF signal on a shared coax: it passes the DC with low loss and presents a high impedance to the RF band.

    Why are Isat and Irms given at several temperatures?
    The part sits in a module that heats up, and both the magnetic and the thermal limits move with temperature. The table lets the bias network be closed at the hot corner.

    What matters for the RF side?
    The impedance at the link frequency, which depends on the inductance and its self-resonance. Keep the operating band below SRF.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products