
| Parameter | Value |
|---|---|
| Orderable part number | PCA2V3223-100-R |
| Inductance | 10 uH ±20% |
| DCR typical @ +20 °C | 150 mOhm |
| Irms (DC, 40 °C rise) | 1300 mA |
| Irms2 | 1200 mA |
| Irms3 | 1100 mA |
| Isat | 450 mA |
| Isat2 | 400 mA |
| Isat3 | 350 mA |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +150 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1351 |

Drawing reproduced from Eaton Technical Data ELX1351: outline with
rated mm dimensions, pad layout and marking.
In a camera or radar link the coax carries both the signal and the DC feed. The inductor is the component that separates them: it looks like a short to DC and a high impedance to the RF, so the bias network does not load the line.
At 1300 A the winding dissipates about 253500 W in copper using the typical DCR of 150 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 1012 nJ at the saturation point, which is the energy available to bridge a load step.
Within the PCA2V3223 family this is value 3 of 4, in a range from 2.2 uH to 15 uH.
The PCA family is the power-over-coax range: small chip inductors for bias-tee circuits in automotive camera and radar links, characterised at multiple temperatures.
Is the part AEC-Q200 qualified?
Yes, the PCA family is qualified for automotive use, which is what a camera or radar module requires.
What does a PoC inductor do in a camera link?
It separates DC bias from the RF signal on a shared coax: it passes the DC with low loss and presents a high impedance to the RF band.
Why are Isat and Irms given at several temperatures?
The part sits in a module that heats up, and both the magnetic and the thermal limits move with temperature. The table lets the bias network be closed at the hot corner.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd