
| Parameter | Value |
|---|---|
| Orderable part number | PCA2V3223-2R2-R |
| Inductance | 2.2 uH ±20% |
| DCR typical @ +20 °C | 180 mOhm |
| Irms (DC, 40 °C rise) | 1350 mA |
| Irms2 | 1220 mA |
| Irms3 | 1045 mA |
| Isat | 1100 mA |
| Isat2 | 1000 mA |
| Isat3 | 950 mA |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +150 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1351 |

Drawing reproduced from Eaton Technical Data ELX1351: outline with
rated mm dimensions, pad layout and marking.
In a camera or radar link the coax carries both the signal and the DC feed. The inductor is the component that separates them: it looks like a short to DC and a high impedance to the RF, so the bias network does not load the line.
At 1350 A the winding dissipates about 328050 W in copper using the typical DCR of 180 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 1331 nJ at the saturation point, which is the energy available to bridge a load step.
Within the PCA2V3223 family this is value 1 of 4, in a range from 2.2 uH to 15 uH.
The PCA family is the power-over-coax range: small chip inductors for bias-tee circuits in automotive camera and radar links, characterised at multiple temperatures.
What matters for the RF side?
The impedance at the link frequency, which depends on the inductance and its self-resonance. Keep the operating band below SRF.
Is the part AEC-Q200 qualified?
Yes, the PCA family is qualified for automotive use, which is what a camera or radar module requires.
What matters for the RF side?
The impedance at the link frequency, which depends on the inductance and its self-resonance. Keep the operating band below SRF.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd