Eaton PCA2V3223-XXX-R 3.2 uH Coax Bias Inductor – mOhm
Eaton PCA2V3223-XXX-R 3.2 uH Coax Bias Inductor – mOhm

Eaton PCA2V3223-XXX-R 3.2 uH Coax Bias Inductor – mOhm

Share
PCA2V3223-XXX-R: power-over-coax inductor, 3.2 uH , Isat 0.2 mA, Irms 0.2 mA, DCR – mOhm.
    • Product Details
    • Download

    Eaton PCA2V3223-XXX-R 3.2 uH Coax Bias Inductor – mOhm

    PCA2V3223-XXX-R at a glance: power-over-coax inductor, 3.2 uH , Isat 0.2 mA, Irms 0.2 mA, DCR – mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberPCA2V3223-XXX-R
    Inductance3.2 uH
    Irms (DC, 40 °C rise)0.2 mA
    Irms22.3 mA
    Isat0.2 mA
    Isat22.5 mA
    MountingSurface mount
    Operating temperature-55 °C to +150 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1351

    Mechanical Drawing

    PCA2V3223-XXX-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1351: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    A power-over-coax inductor sits in the bias-tee of a coaxial link: DC power and the RF signal share one cable, and this part keeps the RF out of the DC supply while passing the bias current. The value is small, the current is modest, and the impedance at the link frequency is what does the work.

    The core stores about 0 nJ at the saturation point, which is the energy available to bridge a load step.

    Within the PCA2V3223 family this is value 2 of 5, in a range from 2.2 uH to 15 uH.

    Positioning in the Range

    The PCA family is the power-over-coax range: small chip inductors for bias-tee circuits in automotive camera and radar links, characterised at multiple temperatures.

    • The bias current and the RF power share the same winding. Check the saturation margin against the sum, not just the DC component.
    • Typical applications: adas camera; srr (short range radar); lidar (light detection and ranging); vehicle communications; autonomous driving (3d mapping).
    • Design note: the impedance at the link frequency matters more than the inductance value on the label.

    Frequently Asked Questions

    What does a PoC inductor do in a camera link?
    It separates DC bias from the RF signal on a shared coax: it passes the DC with low loss and presents a high impedance to the RF band.

    What matters for the RF side?
    The impedance at the link frequency, which depends on the inductance and its self-resonance. Keep the operating band below SRF.

    Is the part AEC-Q200 qualified?
    Yes, the PCA family is qualified for automotive use, which is what a camera or radar module requires.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products