
| Parameter | Value |
|---|---|
| Orderable part number | POEA2FB1V13W1X24 |
| Output power | 13 W |
| OCL (primary inductance) | 40 uH |
| SCL (saturated inductance) | 0.7 uH |
| Isat | 2.4 A |
| Turns ratio pri : sec : aux | 1:1 |
| Output configuration | (1) x 24.0 V |
| DCR primary | 100 mOhm |
| DCR secondary 1 | 100 mOhm |
| DCR secondary 2 | not fitted |
| DCR auxiliary | not fitted |
| Schematic variant | Winding arrangement 8 |
| Package | 14.2 x 17.75 x 12.7 mm |
| Mounting | Surface mount |
| Operating temperature | -40 C to +125 C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1267 |
Outline drawing, winding arrangement and recommended pad layout are on
page 2 of Eaton Technical Data ELX1267; the package line above gives the body size where
the data sheet states it.
A PoE PD flyback transformer takes the 37 to 57 V on the cable and steps it down to the rails the powered device needs, with the isolation barrier in between. The turns ratio, the primary inductance and the saturation current are set by the controller and the power level, not chosen freely.
At the 2.4 A saturation point the primary stores about 115 uJ, which sets the maximum energy per switching cycle.
Within the POEA2FB1V13W1X24 family this is item 1 of 1 in the Eaton catalogue.
The PoE range covers 3 W to 156 W of output in EFD15 to EPC46 cores, flyback and forward topologies, with schematic variants for the common controller families.
What decides the turns ratio?
The controller and the output rail. A flyback with a given primary inductance needs a specific ratio to keep the duty cycle in range at the minimum input voltage, so the ratio is set by the design, not chosen for convenience.
What decides the turns ratio?
The controller and the output rail. A flyback with a given primary inductance needs a specific ratio to keep the duty cycle in range at the minimum input voltage, so the ratio is set by the design, not chosen for convenience.
What decides the turns ratio?
The controller and the output rail. A flyback with a given primary inductance needs a specific ratio to keep the duty cycle in range at the minimum input voltage, so the ratio is set by the design, not chosen for convenience.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd