
| Parameter | Value |
|---|---|
| Orderable part number | POEA2FB3V12W1X12 |
| Output power | 12 W |
| OCL (primary inductance) | 140 uH |
| SCL (saturated inductance) | 1.3 uH |
| Isat | 1.4 A |
| Turns ratio pri : sec : aux | 1:0.389:0.444 |
| Output configuration | (1) x 12.0 V @ 1.0 A |
| DCR primary | 365 mOhm |
| DCR secondary 1 | 40 mOhm |
| DCR secondary 2 | not fitted |
| DCR auxiliary | 290 mOhm |
| Schematic variant | Winding arrangement 3 |
| Package | 14.2 x 17.75 x 12.7 mm |
| Mounting | Surface mount |
| Operating temperature | -40 C to +125 C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1267 |
Outline drawing, winding arrangement and recommended pad layout are on
page 2 of Eaton Technical Data ELX1267; the package line above gives the body size where
the data sheet states it.
PoE transformers are wound for a specific controller family, which is why the schematic column matters: the same core and power level can be wound as 1:0.389 or 1:0.143 depending on the output rail.
At the 1.4 A saturation point the primary stores about 137 uJ, which sets the maximum energy per switching cycle.
Within the POEA2FB3V12W1X12 family this is item 1 of 1 in the Eaton catalogue.
The PoE range covers 3 W to 156 W of output in EFD15 to EPC46 cores, flyback and forward topologies, with schematic variants for the common controller families.
Is the isolation reinforced?
The transformer provides the isolation barrier for the PD; the data sheet states the test voltage. Whether that satisfies reinforced or basic isolation is a system-level question that also involves the board spacing.
What does the schematic number mean?
It refers to the winding arrangement drawing in the data sheet: which winding is primary, how many secondaries, and where the auxiliary sits. Two parts with the same power level and different schematic numbers are not interchangeable.
Is the isolation reinforced?
The transformer provides the isolation barrier for the PD; the data sheet states the test voltage. Whether that satisfies reinforced or basic isolation is a system-level question that also involves the board spacing.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd