Eaton POEB2FB1V42W1X12 PoE Flyback Transformer, 42 W
Eaton POEB2FB1V42W1X12 PoE Flyback Transformer, 42 W

Eaton POEB2FB1V42W1X12 PoE Flyback Transformer, 42 W

Share
POEB2FB1V42W1X12: PoE transformer, 1:0.5:0.5 turns ratio, 42 W.
    • Product Details
    • Download

    Eaton POEB2FB1V42W1X12 PoE Flyback Transformer, 42 W

    POEB2FB1V42W1X12 at a glance: PoE transformer, 1:0.5:0.5 turns ratio, 42 W.

    Key Specifications

    ParameterValue
    Orderable part numberPOEB2FB1V42W1X12
    Output power42 W
    OCL (primary inductance)100 uH
    SCL (saturated inductance)1 uH
    Isat1 A
    Turns ratio pri : sec : aux1:0.5:0.5
    Output configuration(1) x 12.0 V @ 3.5 A
    DCR primary100 mOhm
    DCR secondary 118 mOhm
    DCR secondary 2not fitted
    DCR auxiliary260 mOhm
    Schematic variantWinding arrangement 4
    Package29.3 x 21.8 x 12 mm
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1269

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data ELX1269; the package line above gives the body size where
    the data sheet states it.

    Reading the Data Sheet

    PoE transformers are wound for a specific controller family, which is why the schematic column matters: the same core and power level can be wound as 1:0.389 or 1:0.143 depending on the output rail.

    At the 1 A saturation point the primary stores about 50 uJ, which sets the maximum energy per switching cycle.

    Within the POEB2FB1V42W1X12 family this is item 1 of 1 in the Eaton catalogue.

    What This Family Is For

    The PoE range covers 3 W to 156 W of output in EFD15 to EPC46 cores, flyback and forward topologies, with schematic variants for the common controller families.

    • The isolation barrier is only as good as the board spacing around it. Check creepage on the footprint, not just the part rating.
    • Typical applications: lighting; industrial automation; security systems; voip phone systems; network and bluetooth access points.
    • Design note: check Isat at the maximum ambient, and remember that the auxiliary winding also carries current.

    Frequently Asked Questions

    What decides the turns ratio?
    The controller and the output rail. A flyback with a given primary inductance needs a specific ratio to keep the duty cycle in range at the minimum input voltage, so the ratio is set by the design, not chosen for convenience.

    Can I use a forward part in a flyback design?
    No. The two topologies need different turns ratios and different primary inductance, and a forward transformer has no gap for energy storage.

    What does the schematic number mean?
    It refers to the winding arrangement drawing in the data sheet: which winding is primary, how many secondaries, and where the auxiliary sits. Two parts with the same power level and different schematic numbers are not interchangeable.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message