
| Parameter | Value |
|---|---|
| Orderable part number | RL0607-152-R |
| Inductance | 1500 uH |
| DCR typical @ +20 °C | 1000 mOhm |
| Irms (DC, 40 °C rise) | 0.12 A |
| Isat | 7.2 A |
| Mounting | Through-hole |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10334 |

Drawing reproduced from Eaton Technical Data 10334: outline with
rated mm dimensions, pad layout and marking.
Radial leaded inductors are the traditional choice for power supplies that are wave-soldered and repaired in the field. The sleeve protects the winding and gives the part a defined outside diameter for placement.
At 0.12 A the winding dissipates about 0.014 W in copper using the typical DCR of 1000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 38880 uJ at the saturation point, which is the energy available to bridge a load step.
Within the RL0607 family this is value 12 of 12, in a range from 6.8 uH to 1500 uH.
The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.
Can it be used in a switching supply?
Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.
Is the part shielded?
No. The drum is open at the ends, so keep sensitive traces away from the axis.
Is the part shielded?
No. The drum is open at the ends, so keep sensitive traces away from the axis.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd