Eaton RL0607-820-R 82 uH Leaded Drum Core Inductor
Eaton RL0607-820-R 82 uH Leaded Drum Core Inductor

Eaton RL0607-820-R 82 uH Leaded Drum Core Inductor

Share
RL0607-820-R: radial leaded drum core inductor, 82 uH , 0.53 A Irms, Isat 0.426 A, DCR 6000 mOhm.
    • Product Details
    • Download

    Eaton RL0607-820-R 82 uH Leaded Drum Core Inductor

    RL0607-820-R at a glance: radial leaded drum core inductor, 82 uH , 0.53 A Irms, Isat 0.426 A, DCR 6000 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberRL0607-820-R
    Inductance82 uH
    DCR typical @ +20 °C6000 mOhm
    Irms (DC, 40 °C rise)0.53 A
    Isat0.426 A
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10334

    Outline Drawing

    RL0607-820-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10334: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    This is a through-hole drum core choke: ferrite drum, wound coil, heat-shrink sleeve, tinned leads. The value range runs from a few microhenry into the millihenry region.

    At 0.53 A the winding dissipates about 1.69 W in copper using the typical DCR of 6000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 7.44 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the RL0607 family this is value 6 of 12, in a range from 6.8 uH to 1500 uH.

    Series Positioning

    The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.

    • The leads and the plated holes are part of the current path. Check them, not just the winding, against the rated current.
    • Typical applications: led drivers and lighting; utility meters; appliances and white goods; motor drives; power supplies.
    • Design note: leave clearance around the part for the sleeve and for the field. The inductance depends on nearby metal.

    Frequently Asked Questions

    Is the part shielded?
    No. The drum is open at the ends, so keep sensitive traces away from the axis.

    Is the part shielded?
    No. The drum is open at the ends, so keep sensitive traces away from the axis.

    Can it be used in a switching supply?
    Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products