
| Parameter | Value |
|---|---|
| Orderable part number | RL1011-152-R |
| Inductance | 1499 uH |
| DCR typical @ +20 °C | 3000 mOhm |
| Irms (DC, 40 °C rise) | 0.324 A |
| Isat | 0.39 A |
| SRF typical | 1 MHz |
| Mounting | Through-hole |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10278 |

Drawing reproduced from Eaton Technical Data 10278: outline with
rated mm dimensions, pad layout and marking.
Unshielded drum cores trade radiated field for inductance per unit cost. In the applications these parts serve – filters, bias supplies, low-current converters – the board has room and the field is not a problem.
At 0.324 A the winding dissipates about 0.315 W in copper using the typical DCR of 3000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 114 uJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 1 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
Within the RL1011 family this is value 18 of 19, in a range from 4.43 uH to 2204 uH.
The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.
Can it be used in a switching supply?
Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.
Is the part shielded?
No. The drum is open at the ends, so keep sensitive traces away from the axis.
Why a sleeve over the winding?
It protects the coil during handling and gives the part a defined outside diameter for automated placement.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd