
| Parameter | Value |
|---|---|
| Orderable part number | RL1218-100-R |
| Inductance | 10 uH |
| DCR typical @ +20 °C | 26 mOhm |
| Irms (DC, 40 °C rise) | 4.61 A |
| Isat | 10.2 A |
| SRF typical | 21 MHz |
| Mounting | Through-hole |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10338 |

Drawing reproduced from Eaton Technical Data 10338: outline with
rated mm dimensions, pad layout and marking.
Unshielded drum cores trade radiated field for inductance per unit cost. In the applications these parts serve – filters, bias supplies, low-current converters – the board has room and the field is not a problem.
At 4.61 A the winding dissipates about 0.553 W in copper using the typical DCR of 26 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 520 uJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 21 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
Within the RL1218 family this is value 3 of 19, in a range from 4.7 uH to 12000 uH.
The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.
Can it be used in a switching supply?
Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.
Can it be used in a switching supply?
Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.
Can it be used in a switching supply?
Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd