Eaton RL1218-151-R 150 uH Radial Inductor, 1.89 A
Eaton RL1218-151-R 150 uH Radial Inductor, 1.89 A

Eaton RL1218-151-R 150 uH Radial Inductor, 1.89 A

Share
RL1218-151-R: radial leaded drum core inductor, 150 uH , 1.89 A Irms, Isat 2.56 A, DCR 159 mOhm.
    • Product Details
    • Download

    Eaton RL1218-151-R 150 uH Radial Inductor, 1.89 A

    RL1218-151-R at a glance: radial leaded drum core inductor, 150 uH , 1.89 A Irms, Isat 2.56 A, DCR 159 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberRL1218-151-R
    Inductance150 uH
    DCR typical @ +20 °C159 mOhm
    Irms (DC, 40 °C rise)1.89 A
    Isat2.56 A
    SRF typical3 MHz
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10338

    Mechanical Drawing

    RL1218-151-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10338: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    This is a through-hole drum core choke: ferrite drum, wound coil, heat-shrink sleeve, tinned leads. The value range runs from a few microhenry into the millihenry region.

    At 1.89 A the winding dissipates about 0.568 W in copper using the typical DCR of 159 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 492 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 3 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the RL1218 family this is value 9 of 19, in a range from 4.7 uH to 12000 uH.

    What This Family Is For

    The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.

    • The leads and the plated holes are part of the current path. Check them, not just the winding, against the rated current.
    • Typical applications: led drivers and lighting; utility meters; appliances and white goods; motor drives; power supplies.
    • Design note: leave clearance around the part for the sleeve and for the field. The inductance depends on nearby metal.

    Frequently Asked Questions

    Why a sleeve over the winding?
    It protects the coil during handling and gives the part a defined outside diameter for automated placement.

    What current can the leads carry?
    The Irms column is the thermal rating for the part; the lead and the plated hole also have to be checked at that current.

    What current can the leads carry?
    The Irms column is the thermal rating for the part; the lead and the plated hole also have to be checked at that current.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products