
| Parameter | Value |
|---|---|
| Orderable part number | RL1218-181-R |
| Inductance | 180 uH |
| DCR typical @ +20 °C | 211 mOhm |
| Irms (DC, 40 °C rise) | 1.64 A |
| Isat | 2.34 A |
| SRF typical | 3 MHz |
| Mounting | Through-hole |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10338 |

Drawing reproduced from Eaton Technical Data 10338: outline with
rated mm dimensions, pad layout and marking.
A radial leaded drum core inductor with a protective sleeve over the winding. The leads drop into plated holes, so the part is mechanically anchored to the board rather than held by a solder fillet alone.
At 1.64 A the winding dissipates about 0.568 W in copper using the typical DCR of 211 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 493 uJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 3 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
Within the RL1218 family this is value 10 of 19, in a range from 4.7 uH to 12000 uH.
The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.
Why a sleeve over the winding?
It protects the coil during handling and gives the part a defined outside diameter for automated placement.
Can it be used in a switching supply?
Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.
What current can the leads carry?
The Irms column is the thermal rating for the part; the lead and the plated hole also have to be checked at that current.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd