Eaton RL1218-270-R 27 uH Unshielded Drum Core Inductor
Eaton RL1218-270-R 27 uH Unshielded Drum Core Inductor

Eaton RL1218-270-R 27 uH Unshielded Drum Core Inductor

Share
RL1218-270-R: radial leaded drum core inductor, 27 uH , 3.44 A Irms, Isat 5.97 A, DCR 47 mOhm.
    • Product Details
    • Download

    Eaton RL1218-270-R 27 uH Unshielded Drum Core Inductor

    RL1218-270-R at a glance: radial leaded drum core inductor, 27 uH , 3.44 A Irms, Isat 5.97 A, DCR 47 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberRL1218-270-R
    Inductance27 uH
    DCR typical @ +20 °C47 mOhm
    Irms (DC, 40 °C rise)3.44 A
    Isat5.97 A
    SRF typical6 MHz
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10338

    Mechanical Dimensions & Pad Layout

    RL1218-270-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10338: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Radial leaded inductors are the traditional choice for power supplies that are wave-soldered and repaired in the field. The sleeve protects the winding and gives the part a defined outside diameter for placement.

    At 3.44 A the winding dissipates about 0.556 W in copper using the typical DCR of 47 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 481 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 6 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the RL1218 family this is value 6 of 19, in a range from 4.7 uH to 12000 uH.

    What This Family Is For

    The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.

    • The leads and the plated holes are part of the current path. Check them, not just the winding, against the rated current.
    • Typical applications: led drivers and lighting; utility meters; appliances and white goods; motor drives; power supplies.
    • Design note: leave clearance around the part for the sleeve and for the field. The inductance depends on nearby metal.

    Frequently Asked Questions

    Can it be used in a switching supply?
    Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.

    What current can the leads carry?
    The Irms column is the thermal rating for the part; the lead and the plated hole also have to be checked at that current.

    Why a sleeve over the winding?
    It protects the coil during handling and gives the part a defined outside diameter for automated placement.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products