
| Parameter | Value |
|---|---|
| Orderable part number | RL1218-331-R |
| Inductance | 330 uH |
| DCR typical @ +20 °C | 366 mOhm |
| Irms (DC, 40 °C rise) | 1.25 A |
| Isat | 1.73 A |
| SRF typical | 2 MHz |
| Mounting | Through-hole |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10338 |

Drawing reproduced from Eaton Technical Data 10338: outline with
rated mm dimensions, pad layout and marking.
A radial leaded drum core inductor with a protective sleeve over the winding. The leads drop into plated holes, so the part is mechanically anchored to the board rather than held by a solder fillet alone.
At 1.25 A the winding dissipates about 0.572 W in copper using the typical DCR of 366 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 494 uJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 2 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
Within the RL1218 family this is value 12 of 19, in a range from 4.7 uH to 12000 uH.
The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.
Is the part shielded?
No. The drum is open at the ends, so keep sensitive traces away from the axis.
Is the part shielded?
No. The drum is open at the ends, so keep sensitive traces away from the axis.
What current can the leads carry?
The Irms column is the thermal rating for the part; the lead and the plated hole also have to be checked at that current.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd