Eaton S506-V-2.5-R 2.5 A 250 Vac Time-Delay Axial Lead Glass Tube Fuse
Eaton S506-V-2.5-R 2.5 A 250 Vac Time-Delay Axial Lead Glass Tube Fuse

Eaton S506-V-2.5-R 2.5 A 250 Vac Time-Delay Axial Lead Glass Tube Fuse

Share
pEaton S506-V-2.5-R — 2.5 A, 250 V, time-delay glass cartridge fuse, 35 A at 250 Vac, 50 Hz interrupting./p
    • Product Details
    • Download

    Eaton S506-V-2.5-R 2.5 A 250 Vac Time-Delay Axial Lead Glass Tube Fuse

    The S506-V-2.5-R from Eaton carries 2.5 A, uses a time-delay element, in a glass body.

    Technical Data

    ParameterRating
    ParameterValue
    Orderable part numberS506-V-2.5-R (TR2- = 1,500 pcs on reel; BK- = 100 pcs carton)
    AgencycURus (E19180, JDYX2); SEMKO; VDE; BSI; IMQ; PSE (JET); KC; CCC
    Lead spacing (dim B)38.1 mm +/- 0.38 (BK-) / 15.8 mm +/- 2.0 (TR2-)
    Current rating2.5 A A
    Lead diameter (dim A)0.65 mm tinned copper
    Typical voltage drop72.5 mV at rated current
    Overall length (cap to cap)21.1 mm +/- 0.81 mm
    Design standardIEC 60127-1 and 60127-2, T time-lag
    Interrupting rating35 A at 250 Vac, 50 Hz
    Typical DC cold resistance0.0255 Ohm
    Typical melting I2t59.4 A2s
    Body diameter5.54 mm +/- 0.20 mm
    Body5 x 20 mm glass tube, nickel-plated brass end caps
    Voltage250 Vac

    Practical Notes

    • Interrupting capability is 35 A at 250 Vac, 50 Hz — confirm the circuit's prospective fault current stays below this.
    • Time-delay element rides through motor starting and capacitive inrush without nuisance opening.
    • Startup surges of several times rated current are tolerated for a short window.
    • Glass body lets you inspect the element after a fault.
    • Best kept for lower fault-current circuits where visual diagnosis matters.
    • Do not upsize beyond 2.5 A to stop nuisance trips — fix the cause instead.

    Questions and Answers

    Is the S506-V-2.5-R fast-acting or time-delay?

    It is time-delay. It tolerates short inrush surges.

    Can the S506-V-2.5-R be used on a higher fault-current circuit?

    No — its interrupting rating is 35 A at 250 Vac, 50 Hz. Choose a part whose breaking capacity exceeds the prospective fault current.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products