Welcome to our company!
Eaton S520-10-R 10 A 420 Vac Fast-Acting Ceramic Tube Fuse
Share
pEaton S520-10-R — 10 A, 420 V, fast-acting ceramic cartridge fuse, 1500 A interrupting./p
- Product Details
- Download
Eaton S520-10-R 10 A 420 Vac Fast-Acting Ceramic Tube Fuse
Built by Eaton, the S520-10-R carries 10 A, rated 420 Vac, uses a fast-acting element, in a ceramic body.
Technical Data
| Parameter | Rating |
|---|---|
| Parameter | Value |
| Orderable part number | S520-10-R (BK- = 100 pcs carton, BK1- = 1,000 pcs polybag; S520-V-10-R for axial leads) |
| Rated current | 10 A |
| Typical melting I2t | 155 A2s (measured at 10 In) |
| Interrupting rating at 250 Vac | 1500 A |
| Agency | UR E19180 (JDYX2); TUV T 50484820 02 |
| Interrupting rating at 420 Vac | 200 A |
| Body | 5 x 20 mm ceramic tube, nickel/silver plated brass ends |
| Operating temperature | -55 C to +125 C with derating |
| Voltage rating | 420 Vac |
| Dissipation at rating | 1.11 W |
| Typical DC cold resistance | 8 mOhm |
| Typical voltage drop | 111 mV at rated current |
Selection Notes
- Interrupting capability is 1500 A — confirm the circuit's prospective fault current stays below this.
- Fast element suits resistive and semiconductor loads rather than motors with high inrush.
- Because it opens within milliseconds, downstream semiconductors see less let-through energy.
- Ceramic body holds higher breaking capacity than glass at the same footprint.
- It is the usual choice where prospective fault current is high.
- Working voltage must stay at or below 420 Vac; a lower-rated part is not a safe substitute.
- Do not upsize beyond 10 A to stop nuisance trips — fix the cause instead.
Typical Applications
Engineers usually specify it for these duties:
- PFC
- surge
Q&A
What are the ratings of the S520-10-R?
10 A continuous at 420 Vac, interrupting rating 1500 A.
Is the S520-10-R fast-acting or time-delay?
It is fast-acting. Expect it to open quickly on overload.
Can the S520-10-R be used on a higher fault-current circuit?
No — its interrupting rating is 1500 A. Choose a part whose breaking capacity exceeds the prospective fault current.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
