Eaton SD14-820-R 83 uH Shielded Inductor, 0.408 A
Eaton SD14-820-R 83 uH Shielded Inductor, 0.408 A

Eaton SD14-820-R 83 uH Shielded Inductor, 0.408 A

Share
SD14-820-R: shielded drum core inductor, 83 uH , 0.408 A Irms, Isat 0.407 A, DCR 1500 mOhm.
    • Product Details
    • Download

    Eaton SD14-820-R 83 uH Shielded Inductor, 0.408 A

    SD14-820-R at a glance: shielded drum core inductor, 83 uH , 0.408 A Irms, Isat 0.407 A, DCR 1500 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSD14-820-R
    Rated inductance82 uH
    OCL (open circuit inductance)83 uH
    DCR typical @ +20 °C1500 mOhm
    Irms (DC, 40 °C rise)0.408 A
    Isat0.407 A
    Volt-time rating40 V-us
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data

    Mechanical Drawing

    SD14-820-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data : outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    This is the classic shielded SMD drum inductor: ferrite drum, wound coil, shield sleeve, tinned terminations. It is the workhorse part for DC-DC converters that need a few microhenry at a few amps.

    At 0.408 A the winding dissipates about 0.25 W in copper using the typical DCR of 1500 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 6.87 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SD14 family this is value 17 of 25, in a range from 0.61 uH to 1008 uH.

    Series Positioning

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: digital cameras; media players; mobile phones; hand held equipment; pcmcia cards.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products