Eaton SD18-102-R 1004 uH Drum Core Inductor 14010 mOhm
Eaton SD18-102-R 1004 uH Drum Core Inductor 14010 mOhm

Eaton SD18-102-R 1004 uH Drum Core Inductor 14010 mOhm

Share
SD18-102-R: shielded drum core inductor, 1004 uH , 0.136 A Irms, Isat 0.102 A, DCR 14010 mOhm.
    • Product Details
    • Download

    Eaton SD18-102-R 1004 uH Drum Core Inductor 14010 mOhm

    SD18-102-R at a glance: shielded drum core inductor, 1004 uH , 0.136 A Irms, Isat 0.102 A, DCR 14010 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberSD18-102-R
    Rated inductance1000 uH
    OCL (open circuit inductance)1004 uH
    DCR typical @ +20 °C14010 mOhm
    Irms (DC, 40 °C rise)0.136 A
    Isat0.102 A
    Volt-time rating107 V-us
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data

    Mechanical Drawing

    SD18-102-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data : outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    Shielded drum cores are chosen when the board is dense and the inductor cannot be allowed to radiate. The data sheet gives Irms for the thermal limit and Isat for the inductance rolloff – two different constraints on the same part.

    At 0.136 A the winding dissipates about 0.259 W in copper using the typical DCR of 14010 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 5.22 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SD18 family this is value 24 of 24, in a range from 0.49 uH to 1004 uH.

    What This Family Is For

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: digital cameras; media players; mobile phones; hand held equipment; pcmcia cards.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message