Eaton SD18-151-R 151 uH SMD Power Inductor
Eaton SD18-151-R 151 uH SMD Power Inductor

Eaton SD18-151-R 151 uH SMD Power Inductor

Share
SD18-151-R: shielded drum core inductor, 151 uH , 0.345 A Irms, Isat 0.263 A, DCR 2180 mOhm.
    • Product Details
    • Download

    Eaton SD18-151-R 151 uH SMD Power Inductor

    SD18-151-R at a glance: shielded drum core inductor, 151 uH , 0.345 A Irms, Isat 0.263 A, DCR 2180 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSD18-151-R
    Rated inductance150 uH
    OCL (open circuit inductance)151 uH
    DCR typical @ +20 °C2180 mOhm
    Irms (DC, 40 °C rise)0.345 A
    Isat0.263 A
    Volt-time rating41.3 V-us
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data

    Mechanical Dimensions & Pad Layout

    SD18-151-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data : outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Shielded drum cores are chosen when the board is dense and the inductor cannot be allowed to radiate. The data sheet gives Irms for the thermal limit and Isat for the inductance rolloff – two different constraints on the same part.

    At 0.345 A the winding dissipates about 0.259 W in copper using the typical DCR of 2180 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 5.23 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SD18 family this is value 18 of 24, in a range from 0.49 uH to 1004 uH.

    What This Family Is For

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: digital cameras; media players; mobile phones; hand held equipment; pcmcia cards.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products