
| Parameter | Value |
|---|---|
| Orderable part number | SD20-471-R |
| Rated inductance | 470 uH |
| OCL (open circuit inductance) | 471 uH |
| DCR typical @ +20 °C | 3740 mOhm |
| Irms (DC, 40 °C rise) | 0.263 A |
| Isat | 0.129 A |
| Volt-time rating | 70.5 V-us |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data |

Drawing reproduced from Eaton Technical Data : outline with
rated mm dimensions, pad layout and marking.
The drum core concentrates the flux and the shield closes the return path, so this family behaves more like a closed-core part than an open drum while keeping the inductance-per-volume advantage of a wound component.
At 0.263 A the winding dissipates about 0.259 W in copper using the typical DCR of 3740 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 3.92 uJ at the saturation point, which is the energy available to bridge a load step.
Within the SD20 family this is value 20 of 23, in a range from 0.49 uH to 1005 uH.
The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.
Is the part suitable for a switching converter?
Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.
Is the part suitable for a switching converter?
Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.
Why is Isat lower than Irms on some rows?
They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd