Eaton SD20-681-R 681 uH SMD Power Inductor
Eaton SD20-681-R 681 uH SMD Power Inductor

Eaton SD20-681-R 681 uH SMD Power Inductor

Share
SD20-681-R: shielded drum core inductor, 681 uH , 0.216 A Irms, Isat 0.107 A, DCR 5560 mOhm.
    • Product Details
    • Download

    Eaton SD20-681-R 681 uH SMD Power Inductor

    SD20-681-R at a glance: shielded drum core inductor, 681 uH , 0.216 A Irms, Isat 0.107 A, DCR 5560 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSD20-681-R
    Rated inductance680 uH
    OCL (open circuit inductance)681 uH
    DCR typical @ +20 °C5560 mOhm
    Irms (DC, 40 °C rise)0.216 A
    Isat0.107 A
    Volt-time rating84.8 V-us
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data

    Mechanical Dimensions & Pad Layout

    SD20-681-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data : outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    A shielded drum core inductor: the winding sits on a drum-shaped ferrite core and a shield sleeve closes the magnetic path around it. That is what keeps the radiated field low enough to place the part next to other circuitry.

    At 0.216 A the winding dissipates about 0.259 W in copper using the typical DCR of 5560 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 3.9 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SD20 family this is value 21 of 23, in a range from 0.49 uH to 1005 uH.

    Where This Series Fits

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: digital cameras; media players; mobile phones; hand held equipment; pcmcia cards.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message