
| Parameter | Value |
|---|---|
| Orderable part number | SD20-821-R |
| Rated inductance | 820 uH |
| OCL (open circuit inductance) | 824 uH |
| DCR typical @ +20 °C | 6220 mOhm |
| Irms (DC, 40 °C rise) | 0.204 A |
| Isat | 0.098 A |
| Volt-time rating | 93.3 V-us |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data |

Drawing reproduced from Eaton Technical Data : outline with
rated mm dimensions, pad layout and marking.
This is the classic shielded SMD drum inductor: ferrite drum, wound coil, shield sleeve, tinned terminations. It is the workhorse part for DC-DC converters that need a few microhenry at a few amps.
At 0.204 A the winding dissipates about 0.259 W in copper using the typical DCR of 6220 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 3.96 uJ at the saturation point, which is the energy available to bridge a load step.
Within the SD20 family this is value 22 of 23, in a range from 0.49 uH to 1005 uH.
The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.
Why is Isat lower than Irms on some rows?
They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.
Why is Isat lower than Irms on some rows?
They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.
Why is Isat lower than Irms on some rows?
They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd