Eaton SD25-101-R 101 uH SMD Power Inductor
Eaton SD25-101-R 101 uH SMD Power Inductor

Eaton SD25-101-R 101 uH SMD Power Inductor

Share
SD25-101-R: shielded drum core inductor, 101 uH , 0.67 A Irms, Isat 0.398 A, DCR 594 mOhm.
    • Product Details
    • Download

    Eaton SD25-101-R 101 uH SMD Power Inductor

    SD25-101-R at a glance: shielded drum core inductor, 101 uH , 0.67 A Irms, Isat 0.398 A, DCR 594 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSD25-101-R
    Rated inductance100 uH
    OCL (open circuit inductance)101 uH
    DCR typical @ +20 °C594 mOhm
    Irms (DC, 40 °C rise)0.67 A
    Isat0.398 A
    Volt-time rating31.3 V-us
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data

    Mechanical Dimensions & Pad Layout

    SD25-101-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data : outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Shielded drum cores are chosen when the board is dense and the inductor cannot be allowed to radiate. The data sheet gives Irms for the thermal limit and Isat for the inductance rolloff – two different constraints on the same part.

    At 0.67 A the winding dissipates about 0.267 W in copper using the typical DCR of 594 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 7.98 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SD25 family this is value 17 of 24, in a range from 0.466 uH to 1003 uH.

    Where This Series Fits

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: digital cameras; media players; mobile phones; hand held equipment; pcmcia cards.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products