Eaton SD3110-470-R 46.3 uH Drum Core Inductor 2060 mOhm
Eaton SD3110-470-R 46.3 uH Drum Core Inductor 2060 mOhm

Eaton SD3110-470-R 46.3 uH Drum Core Inductor 2060 mOhm

Share
SD3110-470-R: shielded drum core inductor, 46.3 uH ±20%, 0.22 A Irms, Isat 0.22 A, DCR 2060 mOhm.
    • Product Details
    • Download

    Eaton SD3110-470-R 46.3 uH Drum Core Inductor 2060 mOhm

    SD3110-470-R at a glance: shielded drum core inductor, 46.3 uH ±20%, 0.22 A Irms, Isat 0.22 A, DCR 2060 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSD3110-470-R
    Rated inductance47 uH ±20%
    OCL (open circuit inductance)46.3 uH ±20%
    DCR typical @ +20 °C2060 mOhm
    Irms (DC, 40 °C rise)0.22 A
    Isat0.22 A
    K-factor25
    Package3.1 x 3.1 x 1 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4137

    Mechanical Dimensions & Pad Layout

    SD3110-470-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4137: outline with
    rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    The drum core concentrates the flux and the shield closes the return path, so this family behaves more like a closed-core part than an open drum while keeping the inductance-per-volume advantage of a wound component.

    At 0.22 A the winding dissipates about 0.1 W in copper using the typical DCR of 2060 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 1.12 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 25 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD3110 family this is value 14 of 19, in a range from 0.44 uH to 219 uH.

    What This Family Is For

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: mobile phones; digital cameras; media players; small lcd displays; led driver and led flash circuits.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products