Eaton SD3110-8R2-R 8.01 uH Shielded Inductor, Isat 0.53 A
Eaton SD3110-8R2-R 8.01 uH Shielded Inductor, Isat 0.53 A

Eaton SD3110-8R2-R 8.01 uH Shielded Inductor, Isat 0.53 A

Share
SD3110-8R2-R: shielded drum core inductor, 8.01 uH ±30%, 0.48 A Irms, Isat 0.53 A, DCR 432 mOhm.
    • Product Details
    • Download

    Eaton SD3110-8R2-R 8.01 uH Shielded Inductor, Isat 0.53 A

    SD3110-8R2-R at a glance: shielded drum core inductor, 8.01 uH ±30%, 0.48 A Irms, Isat 0.53 A, DCR 432 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSD3110-8R2-R
    Rated inductance8.2 uH ±30%
    OCL (open circuit inductance)8.01 uH ±30%
    DCR typical @ +20 °C432 mOhm
    Irms (DC, 40 °C rise)0.48 A
    Isat0.53 A
    K-factor61
    Package3.1 x 3.1 x 1 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4137

    Mechanical Drawing

    SD3110-8R2-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4137: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Shielded drum cores are chosen when the board is dense and the inductor cannot be allowed to radiate. The data sheet gives Irms for the thermal limit and Isat for the inductance rolloff – two different constraints on the same part.

    At 0.48 A the winding dissipates about 0.1 W in copper using the typical DCR of 432 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 1.13 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 61 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD3110 family this is value 9 of 19, in a range from 0.44 uH to 219 uH.

    Where This Series Fits

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: mobile phones; digital cameras; media players; small lcd displays; led driver and led flash circuits.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products