
| Parameter | Value |
|---|---|
| Orderable part number | SD3112-3R3-R |
| Rated inductance | 3.3 uH ±30% |
| OCL (open circuit inductance) | 3.24 uH ±30% |
| DCR typical @ +20 °C | 165 mOhm |
| Irms (DC, 40 °C rise) | 0.9 A |
| Isat | 0.97 A |
| K-factor | 79 |
| Package | 3.1 x 3.1 x 1.2 mm |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4127 |

Drawing reproduced from Eaton Technical Data 4127: outline with
rated mm dimensions, pad layout and marking.
This is the classic shielded SMD drum inductor: ferrite drum, wound coil, shield sleeve, tinned terminations. It is the workhorse part for DC-DC converters that need a few microhenry at a few amps.
At 0.9 A the winding dissipates about 0.134 W in copper using the typical DCR of 165 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 1.52 uJ at the saturation point, which is the energy available to bridge a load step.
The K-factor of 79 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.
Within the SD3112 family this is value 4 of 17, in a range from 1.11 uH to 220 uH.
The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.
Why is Isat lower than Irms on some rows?
They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.
What does the shield actually do?
It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.
What does the shield actually do?
It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd