Eaton SD3114-1R0-R 1.16 uH Drum Core Inductor 58 mOhm
Eaton SD3114-1R0-R 1.16 uH Drum Core Inductor 58 mOhm

Eaton SD3114-1R0-R 1.16 uH Drum Core Inductor 58 mOhm

Share
SD3114-1R0-R: shielded drum core inductor, 1.16 uH ±30%, 1.6 A Irms, Isat 2.35 A, DCR 58 mOhm.
    • Product Details
    • Download

    Eaton SD3114-1R0-R 1.16 uH Drum Core Inductor 58 mOhm

    SD3114-1R0-R at a glance: shielded drum core inductor, 1.16 uH ±30%, 1.6 A Irms, Isat 2.35 A, DCR 58 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSD3114-1R0-R
    Rated inductance1 uH ±30%
    OCL (open circuit inductance)1.16 uH ±30%
    DCR typical @ +20 °C58 mOhm
    Irms (DC, 40 °C rise)1.6 A
    Isat2.35 A
    K-factor98
    Package3.1 x 3.1 x 1.4 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4128

    Mechanical Drawing

    SD3114-1R0-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4128: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    This is the classic shielded SMD drum inductor: ferrite drum, wound coil, shield sleeve, tinned terminations. It is the workhorse part for DC-DC converters that need a few microhenry at a few amps.

    At 1.6 A the winding dissipates about 0.148 W in copper using the typical DCR of 58 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 3.2 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 98 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD3114 family this is value 1 of 18, in a range from 1.16 uH to 330 uH.

    What This Family Is For

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: mobile phones,; digital cameras; media players; small lcd displays; led driver and led flash circuits.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products