Eaton SD3114-8R2-R 8.1 uH SMD Power Inductor
Eaton SD3114-8R2-R 8.1 uH SMD Power Inductor

Eaton SD3114-8R2-R 8.1 uH SMD Power Inductor

Share
SD3114-8R2-R: shielded drum core inductor, 8.1 uH ±30%, 0.68 A Irms, Isat 0.89 A, DCR 329 mOhm.
    • Product Details
    • Download

    Eaton SD3114-8R2-R 8.1 uH SMD Power Inductor

    SD3114-8R2-R at a glance: shielded drum core inductor, 8.1 uH ±30%, 0.68 A Irms, Isat 0.89 A, DCR 329 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberSD3114-8R2-R
    Rated inductance8.2 uH ±30%
    OCL (open circuit inductance)8.1 uH ±30%
    DCR typical @ +20 °C329 mOhm
    Irms (DC, 40 °C rise)0.68 A
    Isat0.89 A
    K-factor34
    Package3.1 x 3.1 x 1.4 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4128

    Mechanical Dimensions & Pad Layout

    SD3114-8R2-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4128: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    The drum core concentrates the flux and the shield closes the return path, so this family behaves more like a closed-core part than an open drum while keeping the inductance-per-volume advantage of a wound component.

    At 0.68 A the winding dissipates about 0.152 W in copper using the typical DCR of 329 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 3.21 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 34 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD3114 family this is value 7 of 18, in a range from 1.16 uH to 330 uH.

    Positioning in the Range

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: mobile phones,; digital cameras; media players; small lcd displays; led driver and led flash circuits.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products