
| Parameter | Value |
|---|---|
| Orderable part number | SD3118-470-R |
| Inductance | 47.5 uH ±30% |
| DCR typical @ +20 °C | 1200 mOhm |
| Irms (DC, 40 °C rise) | 0.37 A |
| Isat | 0.42 A |
| K-factor | 12 |
| Package | 31 x 18 mm |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4084 |

Drawing reproduced from Eaton Technical Data 4084: outline with
rated mm dimensions, pad layout and marking.
The drum core concentrates the flux and the shield closes the return path, so this family behaves more like a closed-core part than an open drum while keeping the inductance-per-volume advantage of a wound component.
At 0.37 A the winding dissipates about 0.164 W in copper using the typical DCR of 1200 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 4.19 uJ at the saturation point, which is the energy available to bridge a load step.
The K-factor of 12 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.
Within the SD3118 family this is value 10 of 15, in a range from 1.04 uH to 999 uH.
The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.
What is the Volt-us column?
The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.
What does the shield actually do?
It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.
Why is Isat lower than Irms on some rows?
They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd