Eaton SD3812-R47-R 0.405 uH SMD Power Inductor
Eaton SD3812-R47-R 0.405 uH SMD Power Inductor

Eaton SD3812-R47-R 0.405 uH SMD Power Inductor

Share
SD3812-R47-R: shielded drum core inductor, 0.405 uH , 2.53 A Irms, Isat 3.89 A, DCR 30 mOhm.
    • Product Details
    • Download

    Eaton SD3812-R47-R 0.405 uH SMD Power Inductor

    SD3812-R47-R at a glance: shielded drum core inductor, 0.405 uH , 2.53 A Irms, Isat 3.89 A, DCR 30 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberSD3812-R47-R
    Rated inductance0.47 uH
    OCL (open circuit inductance)0.405 uH
    DCR typical @ +20 °C30 mOhm
    Irms (DC, 40 °C rise)2.53 A
    Isat3.89 A
    Volt-time rating2.52 V-us
    Package38 x 12 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4318

    Outline Drawing

    SD3812-R47-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4318: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Shielded drum cores are chosen when the board is dense and the inductor cannot be allowed to radiate. The data sheet gives Irms for the thermal limit and Isat for the inductance rolloff – two different constraints on the same part.

    At 2.53 A the winding dissipates about 0.192 W in copper using the typical DCR of 30 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 3.06 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SD3812 family this is value 1 of 19, in a range from 0.405 uH to 218 uH.

    What This Family Is For

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: mobile phones; digital cameras; media players; small lcd displays; led driver and led flash circuits.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products