
| Parameter | Value |
|---|---|
| Orderable part number | SD3814-820-R |
| Rated inductance | 82 uH |
| OCL (open circuit inductance) | 81.1 uH |
| DCR typical @ +20 °C | 2174 mOhm |
| Irms (DC, 40 °C rise) | 0.27 A |
| Isat | 0.296 A |
| Volt-time rating | 32 V-us |
| Package | 38 x 14 mm |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4318 |

Drawing reproduced from Eaton Technical Data 4318: outline with
rated mm dimensions, pad layout and marking.
A shielded drum core inductor: the winding sits on a drum-shaped ferrite core and a shield sleeve closes the magnetic path around it. That is what keeps the radiated field low enough to place the part next to other circuitry.
At 0.27 A the winding dissipates about 0.158 W in copper using the typical DCR of 2174 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 3.55 uJ at the saturation point, which is the energy available to bridge a load step.
Within the SD3814 family this is value 15 of 21, in a range from 0.36 uH to 3814 uH.
The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.
Why is Isat lower than Irms on some rows?
They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.
Why is Isat lower than Irms on some rows?
They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.
What is the Volt-us column?
The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd