
| Parameter | Value |
|---|---|
| Orderable part number | SD52-330-R |
| Inductance | 33 uH |
| DCR typical @ +20 °C | 307 mOhm |
| Irms (DC, 40 °C rise) | 0.7 A |
| Isat | 0.61 A |
| Volt-time rating | 7.7 V-us |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4311 |

Drawing reproduced from Eaton Technical Data 4311: outline with
rated mm dimensions, pad layout and marking.
A shielded drum core inductor: the winding sits on a drum-shaped ferrite core and a shield sleeve closes the magnetic path around it. That is what keeps the radiated field low enough to place the part next to other circuitry.
At 0.7 A the winding dissipates about 0.151 W in copper using the typical DCR of 307 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 6.14 uJ at the saturation point, which is the energy available to bridge a load step.
Within the SD52 family this is value 10 of 14, in a range from 1.2 uH to 150 uH.
The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.
Why is Isat lower than Irms on some rows?
They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.
What does the shield actually do?
It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.
Is the part suitable for a switching converter?
Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd