Eaton SD53-100-R 10 uH Drum Core Inductor 77 mOhm
Eaton SD53-100-R 10 uH Drum Core Inductor 77 mOhm

Eaton SD53-100-R 10 uH Drum Core Inductor 77 mOhm

Share
SD53-100-R: shielded drum core inductor, 10 uH , 1.41 A Irms, Isat 1.4 A, DCR 77 mOhm.
    • Product Details
    • Download

    Eaton SD53-100-R 10 uH Drum Core Inductor 77 mOhm

    SD53-100-R at a glance: shielded drum core inductor, 10 uH , 1.41 A Irms, Isat 1.4 A, DCR 77 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSD53-100-R
    Inductance10 uH
    DCR typical @ +20 °C77 mOhm
    DCR maximum @ +20 °C90 mOhm
    Irms (DC, 40 °C rise)1.41 A
    Isat1.4 A
    K-factor15
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4149

    Mechanical Dimensions & Pad Layout

    SD53-100-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4149: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Shielded drum cores are chosen when the board is dense and the inductor cannot be allowed to radiate. The data sheet gives Irms for the thermal limit and Isat for the inductance rolloff – two different constraints on the same part.

    At 1.41 A the winding dissipates about 0.153 W in copper using the typical DCR of 77 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 9.8 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 15 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD53 family this is value 6 of 12, in a range from 1.1 uH to 100 uH.

    Positioning in the Range

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: desktop computers; notebook and laptop regulators; led and white led drivers; digital cameras, media devices; battery power systems.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products