Eaton SD53-101-R 100 uH SMD Power Inductor
Eaton SD53-101-R 100 uH SMD Power Inductor

Eaton SD53-101-R 100 uH SMD Power Inductor

Share
SD53-101-R: shielded drum core inductor, 100 uH , 0.44 A Irms, Isat 0.45 A, DCR 689 mOhm.
    • Product Details
    • Download

    Eaton SD53-101-R 100 uH SMD Power Inductor

    SD53-101-R at a glance: shielded drum core inductor, 100 uH , 0.44 A Irms, Isat 0.45 A, DCR 689 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberSD53-101-R
    Inductance100 uH
    DCR typical @ +20 °C689 mOhm
    DCR maximum @ +20 °C801 mOhm
    Irms (DC, 40 °C rise)0.44 A
    Isat0.45 A
    K-factor5
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4149

    Outline Drawing

    SD53-101-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4149: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    This is the classic shielded SMD drum inductor: ferrite drum, wound coil, shield sleeve, tinned terminations. It is the workhorse part for DC-DC converters that need a few microhenry at a few amps.

    At 0.44 A the winding dissipates about 0.133 W in copper using the typical DCR of 689 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 10.1 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 5 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD53 family this is value 12 of 12, in a range from 1.1 uH to 100 uH.

    What This Family Is For

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: desktop computers; notebook and laptop regulators; led and white led drivers; digital cameras, media devices; battery power systems.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products